Product Features:

Rheopoly® PPA 3524N is free flow,  20mesh white granular fluoropolymer based process aid. At a very low level  addition (100－800ppm), it can improve  PE processing, and does not change the original physical property of the  plastics as well as sealing, adhesion and printing. It can be used for  mLLDPE, LLDPE, HDPE, LDPE, EVA and other thermoplastic resins. With advanced  technology , PPA 3524N can be effective at 50-70% dosage as traditional PPA  products. This product also has a faster conditioning and stronger  interaction resistance.

Product Form:

White to off-white granular

Application:

Wire & Cable，Pipe extrusion and all other polyolefin extrusion process

Physical properties:

Bulk Density

0.72g/cm³

Inorganic ingredients

2%

Particle Size

Less than 20 mesh

Volatile

0.12

Processing Guide:

PPA dispersion in the resin is critical to the performance.The  recommended process is to add PPA via 2% to 3% masterbatch through twin-screw  extruder.The conditioning time is 15-60mins according to the equipment, resin  and shear rate.

Benefits:

- Improve film surface quality by eliminating melt frature

- Shorten down time by reducing die build up

- Increase the ratio of LLDPE in LLDPE/LDPE blends for lower cost ,  higher quality

- Increase output and energy saving

Shelf life:

2 years, below 30℃, avoid extensive humidity and light

Package:

Net 20kg, per carton